Model : Sport
Application :
Monorail Hoist, Transfer Trolleys, Furnace Doors

Functions :
Main Power : Start/Stop
Hoist : Up/Down
Trolley : Left / Right
Hooter/Bell : Yes
Emergency Stop : Yes

Model : COMBI

Application :
1) Dual Joystick Type
2) Four Motion EOT Crane
3) Creep Motion in All Crane
4) Tower Crane
Functions :
Main Power : Start/Stop
Hoist : Up/Down 4-0-4
Aux Hoist : Up/Down 4-0-4
Cross Travel : Right/Left 4-0-4
Long Travel : Forward/Reverse 4-0-4
Creep in All Motions : Yes
Drive Reset : Yes
Hooter / Bell : Yes
Emergency Stop : Yes
Bridge Light : Yes

Model : ACD-201
The Anticollision system model ACD-201 is a safety device to avoid to collision of two electric overhead travelling cranes working on the same rails.

The System works on the principle of retro-reflective infrared waves. It consists of an emitter and sensor module and a special reflector. The emitter emits the infrared waves in the direction of the reflector. The reflector reflects these infrared waves back to the sensor. The sensor senses the presence of these reflected infrared waves and activities an alarm signal and stops/reduces the speed of the cranes. Thus if the two cranes are away from each other then the reflected waves will not reach the sensor and the cranes operate normally. The sensing distance is adjustable between 3 to 10 meters. The anti collision system is specially designed for the crane application and is suitable for the continuous duty.

Each set consists of an Emitter/sensor module and a Reflector.

For one pair of cranes two sets of anticollision systems are required.

Model : 2/5/6/7/8/10/12/14 Application : Pendant or cabin operated cranes Functions : Magnetic Key : Yes
Main Power : ON
Hoist : Up/Down 1 step
Cross Travel : Right/Left 1 step
Long Travel : Forward/Reverse 1 step
Hooter : Yes
Battery Check LED: Yes
Emergency Stop : Yes

Long Life - With LED s
Power Saving Feature - Power Consumption (10 watts)
Available in Red, Blue, Yellow Colours
Easy to Install.
Maintenance Free.
Installation - Indoor / Outdoor